EasyManua.ls Logo

Sofarsolar HYD 10KTL-3PH - Basic safety information; 2.1 Safety information

Default Icon
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BASIC SAFETY INFORMATION
8 HYD 5K...20KTL-3PH
2 Basic safety information
NOTE
If you have any questions or problems after reading the
following information, please contact SOFARSOLAR
This chapter details the safety information pertaining to the
installation and operation of the device.
2.1 Safety information
Read and understand the instructions within this manual and
familiarise yourself with the relevant safety symbols in this chapter
before beginning with the installation of the device and eliminating
any faults.
Before connecting to the power grid, you must obtain official
authorisation from the local power grid operator in accordance with
the corresponding national and state requirements. Furthermore,
operation may only be carried out by qualified electricians.
Please contact the nearest authorised service centre if any
maintenance or repairs are required. Please contact your dealer to
obtain information about your nearest authorised service centre. Do
NOT carry out repairs on the device yourself; this may lead to injury or
property damage.
Before installing the device or carrying out maintenance on it, you
must open the DC switch in order to interrupt the DC voltage of the
PV generator. You can also switch off the DC voltage by opening the

Other manuals for Sofarsolar HYD 10KTL-3PH

Related product manuals