Sofarsolar HYD 3K-6K-EP - Page 50

HYD 3K~6K-EP User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd。
- 45 -
2. Anti Reflux
The user can enable “Anti Reflux Control” to limit the max export power to
grid.Reflux Power set is desired max export power to grid. Refer to 4.7.2 for
connection of the system when using Anti Reflux function.
2.Anti Reflux
OK
1.Anti Reflux Control
OK
Enable
Disable
2.Reflux Power
OK
***KW
3. IV Curve Scan
The user can enable “IV Curve Scan” (MPPT scan) to make inverter to find
the global max power point periodically to deliver max power from a partially
shaded PV array.
The user can input scan period or make inverter to perform a scan right away.
3.IV Curve Scan
OK
1.Scan Control
OK
Enable
Disable
2.Scan Period
OK
***min
3.Force Scan
OK
4. Logic interface Control
Enable or disable logical interfaces. Please refer to this manual 4.7.2, inverter
logic interface connection for details.
4.Logic interface Control
OK
Enable
OK
Disable
OK
5. Factory Reset
5.Factory Reset
OK
1.Clear Energy Data
OK
2.Clear Events
OK
Clean the inverter of the total power generation.
1.Clear Energy Data
OK
Input password
OK Input 0001
Clean up the historical events recorded in the inverter.
2..Clear Events
OK
Clear Events?
OK
6. Parallel setting
Please refer to <4.7.3 Link Port 0&1-Cascade communication interface> for
the connection method of the parallel system.
6.Parallel setting
OK
1.Parallel Control
2.Parallel Primary-Replica
3.Parallel Address
4.Save