EasyManua.ls Logo

Sofarsolar SOFAR 80KTLX-G3 - Symbols and Signs

Default Icon
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SOFAR 60-80KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
5
1.2. Symbols and signs
High voltage of inverter may be harmful to health!
Only certified engineer can operate the product;
Juveniles, Disable, should not use this product;
Keep this product out of the reach of children;
Danger
Caution of burn injuries due to hot enclosure!
Only touch the screen and pressing key of the inverter while it is
working
Caution
PV array should be grounded in accordance to the requirements of
the local electrical grid company
Attention
Ensure the maximum DC voltage input is less than the maximum
inverter DC voltage (including in low temperature condition). Any
damage cause by over-voltage, SOFARSOLAR will not take the
responsibility including warranty
Warning
Signs on the Product and on the Type Label
SOFAR 60~80KTLX-G3 has some safety symbols on the inverter. Please read and
fully understand the content of the symbols before installation.
Symbols
Name
Explanation
This is a residual voltage in
the inverter!
After disconnect with the DC side,
there is a residual voltage in the
inverter, operator should wait for 5
minutes to ensure the capacitor is
completely discharged.
Caution of high voltage and
electric shock
The products operates at high
voltages. Prior to performing any work
on the product, disconnect the product
from voltage sources. All work on the
product must be carried out by
qualified persons only.
Caution of hot surface
The product can get hot during
operation. Avoid contact during
operation. Prior to performing any
work on the product, allow the product

Related product manuals