SOFAR 60-80KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
value allowed to be transmitted to the grid.
11. Logic interface
Enable or disable logical interfaces. It is use for below standard Australia (AS4777),
Europe General (50549), German(4105).
12. IV Curve Scan
Shadow scanning, when the component is blocked or abnormal, causing multiple
power peaks, by enabling this function, the peak point of maximum power can be
tracked.
13. Set Power Derate
Enable or disable the power derate function of the inverter, and set the derate
ratio.
14. PCC Select
Select which way to sample power at the on-grid point.
15. Reflux Mode
Select reflux mode.
（B）Event List：
Event List is used to display the real-time event records, including the total number
of events and each specific ID No. and happening time. User can enter Event List
interface through main interface to check details of real-time event records, Event
will be listed by the happening time, and recent events will be listed in the front.
Please refer to below picture. Long press the button and short press the button to
turn the page in standard interface, then enter into “2.Event List” interface.
001 ID04 06150825
(Display the event sequence number, event ID number,
and event occurrence time )
(C) “SystemInfo” Interface as below
To Next Page
Loading...
