SOFAR 60-80KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
contact the customer service to modify the
protection points of over / under voltage and over
/ under frequency of inverter grid.
Lightning
protection
fault(AC)
Output hardware
overcurrent
permanent failure
Internal faults of inverter, switch OFF inverter,
wait for 5 minutes, then switch ON inverter.
Check whether the problem is solved.
If not, please contact SOFARSOLAR technical
support.
Permanent Bus
overvoltage failure
Busovervoltage
hardware
permanent fault
PV unbalance
current permanent
fault
Output transient
overcurrent
permanent failure
Output current
imbalance
permanent fault
Input mode setting
error permanent
failure
Internal faults of inverter, switch OFF inverter,
wait for 5 minutes, then switch ON inverter.
Check whether the problem is solved.
If not, please contact SOFARSOLAR technical
support.
Input overcurrent
permanent fault
Input hardware
overcurrent
permanent failure
Bus Unbalanced
permanent fault
LightningProt
ectionFaultD
C
LightningProt
ectionFaultA
C
Internal faults of inverter, switch OFF inverter,
wait for 5 minutes, then switch ON inverter.
Check whether the problem is solved.
If not, please contact SOFARSOLAR technical
support.