SOFAR 60-80KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
Qualified Person
When inverter is working, it contains lethal voltages and went hot in some area.
Improper installation or misoperation could cause serial damage and injury. To
reduce the risk of personal injury and to ensure the safe installation and operation of
the product, only a qualified electrician is allowed to execute transportation,
installation, commissioning and maintenance. Shenzhen SOFARSOLAR Co, Ltd.
does not take any responsibility for the property destruction and personal injury
because of any incorrect use.
Label and Symbols
SOFAR 60~80KTLX-G3 has type label attach the side of product which contact
important information and technical data, the type label must permanent attached to
the product.
SOFAR 60~80KTLX-G3 has warming symbol attache the product which contact
information of safety operation. The warming symbol must permanent attached to
the product.
Installation location requirement
Please install the SOFAR 60~80KTLX-G3 on-grid inverter according to the
following section. Place inverter in an appropriate bearing capacity objects (such as
solid brick wall, or strength equivalent mounting surface, etc.) and make sure
inverter vertical placed. A proper installation location must have enough space for
fire engine access in order for maintenance if faulty occur. Ensure the inverter is
installed in a wall ventilated environment and have enough air cooling cycle. Air
humidity should less than 90%.
To Next Page
Loading...
