Softub Hot Tub - GFCI Safety and Testing; SoftSparkle LED Light Features

GROUND FAULT CIRCUIT INTERRUPTER (GFCI)
The Softub cord is fitted with a Ground Fault Circuit Interrupter (GFCI), a
very important safety feature. The GFCI shuts off the electricity in a frac-
tion of a second if there is a short in the cord or the motor unit. This plug
fits conventional 110-volt outlets found in most homes. It is recommended
that the GFCI be tested prior to each use. The test procedures are as fol-
lows:
A. Push the TEST button on the GFCI. The light on the GFCI and the
light(s) on the control panel should go out. If any of the lights fail to go out,
DO NOT USE THE SOFTUB. UNPLUG THE UNIT AND CALL YOUR
DEALER FOR INSTRUCTIONS.
B. If the GFCI tests are okay, firmly push the RESET button back into
place and the motor unit should resume power. If RESET button fails to
reset properly, or if power does not return to the motor unit, UNPLUG THE
UNIT AND CALL YOUR DEALER FOR INSTRUCTIONS.
C. If the GFCI trips by itself at any time, firmly press the RESET button
back into place and perform the above tests. If this happens more than
once, UNPLUG THE UNIT AND CALL YOUR DEALER FOR INSTRUC-
TIONS.
SOFTSPARKLE
TM
MULTI-COLOR LED LIGHT
Some Softubs come equipped with the
SoftSparkle multi-color LED light. This
optional light affords 10 different light-
ing effects for your tub. If your tub
came equipped with the standard
white LED light, simply depressing the
light button will turn the light on and off.
If your tub came equipped with the
SoftSparkle LED light, the following
instructions explain the light and how it
operates.
Multi-color LED light - This is a 12 cluster LED RGB (red, green, blue). It
has 4 red, 4 green and 4 blue LED lights. This light is programmed for 10
different light modes. They are:
- White
- Spectrum Slow Dance (slow fades through the color spectrum)
- Sunburst (yellow and orange glow)
14