EasyManua.ls Logo

Softub Hot Tub - Installation Guide; Installation Site Selection

Softub Hot Tub
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING: The use of alcohol, drugs or medication can greatly
increase the risk of fatal hyperthermia.
16. Do not fill the Softub through any water-softening device as this could
damage the liner.
Installation Instructions
All units supplied as a cord-connected spa with pump and spa-side con-
trols. Some units have included a lighting fixture. All units include a GFCI
(Ground Fault Circuit Interruptor) that is attached to the cord.
SITE SELECTION
Before selecting a site, please be
sure and read the Safety
Instructions, Manufacturers Warn-
ings, and relevant Indoor and
Outdoor Installation sections.
Your Softub is completely self-con-
tained and portable. It can be set up on
a patio, deck, or even indoors.
A. Structure: The Softub should
always be placed on a structurally
strong, relatively smooth and level sur-
face (see specifications on page 24 for
loading capacity).
B. Drainage: Do not place the motor unit in an area where water will “pud-
dle” around it.
C. Electrical: Allow easy access to the Ground Fault Circuit Interruptor
(GFCI), which is located on the end of the power cord. The 110-volt GFCI
and the outlet it is plugged into should be protected from extreme weath-
er, landscape sprinklers, and accidental spills.
7

Related product manuals