EasyManua.ls Logo

Softub Hot Tub - Leather Tex Exterior Care; Filter Maintenance and Cleaning; Winterizing Your Softub

Softub Hot Tub
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LEATHER TEX
®
The exterior of the tub, lid, motor unit and vinyl cover, are made of Leather
Tex which is a marine grade vinyl specifically formulated to resist mildew,
cracking and discoloration.
A. Cleaning
Use a mild soap and water solution to wash the vinyl, then rinse with clean
water. Avoid abrasive soaps, tools or any other solvents. Improper use of
these products can void the warranty.
B. Solar Exposure
If the Softub is located outside, we strongly recommend the use of the
Softub Protective Cover (available from your dealer). This will protect the
Softub from direct ultra-violet (UV) exposure, keep rain water out of the
tub, and keep the surface clean. If you are placing a dark color Softub in
direct sunlight, the use of a Softub Protective Cover is highly recommend-
ed to help prevent deterioration of the outer Leather Tex vinyl. Never cover
your Softub with a transparent plastic covering of any sort for it will dam-
age the tub.
C. Repair
If your exterior does get a tear or puncture, contact your dealer.
FILTER CLEANING
Clean your filter at least once a month depending on usage. To do so,
remove the filter in warm water, remove the outer sock and follow the
directions on the bottle of the filter cleaner. Replace the sock and snap the
filter into position on either of the suction covers. After pushing into place,
rotate the filter until it has 1.2” of clearance between the filter and the bot-
tom of the unit. You must first soak the filter connector in luke warm
water for one or two minutes for ease of installation. Do not attempt
to remove or install the filter unless the filter connector is warm. The
filter should be replaced at least once a year.
WINTERIZING
If you are leaving your tub for an extended period of time, or do not plan
on using it, drain your system completely. Turn the motor unit so that the
hoses are facing down, and allow all water to drain from the internal
plumbing. Failure to do so may cause the water to freeze in cold climates
and severely damage your motor unit. Replace the lid on the tub.
17

Related product manuals