SoftSparkle
TM
Multi-Color LED Light
Some Softubs come equipped with
the SoftSparkle multi-color LED light.
This optional light affords 10
different lighting effects for your tub.
If your tub came equipped with this
light, the following instructions
explain the light and how it operates.
The SoftSparkle multi-color LED light is a 12 cluster LED RGB (red, green, blue). It has
4 red, 4 green and 4 blue LED lights. This light is programmed for 10 different light
modes. They are:
- White
- Spectrum Slow Dance (slow fades through the color spectrum)
- Sunburst (yellow and orange glow)
- Blue
- Red
- Green
- Magenta Fade (pink, blue and red glow)
- Tidal Fade (blue and green glow)
- Afterburner Fade (red, orange, yellow, pink and purple glow)
- Color burst (strobe effect through color spectrum)
The unit operates in the following manner:
Depressing the light button turns the light on in the same mode it was last in. For
example: if the light was white when it was shut off, it will be white when it is turned on
a few days later. If the light is turned off then back on within 10 seconds, it advances to
the next mode. For example: if the light is white, is turned off and the light is turned
back on within 10 seconds it will come back on in the Spectrum Slow Dance mode.
Turning it off and back on again within 10 seconds will now advance the mode to the
Sunburst effect. If it is turned off for over 10 seconds, when turned back on it will be in
the last mode it was in. For example: the light is blue and it is turned off. If the light is
turned on in 1 minute, 30 minutes, 3 weeks, etc. the light will come back on in the blue
mode. So once a favorite mode is selected, just turning the light on and off when using
the tub will keep it in the same mode. To advance to another mode, turn the light on
and off within a 10 second time period.
Combination Lock
Your Softub features a patented combination
lock located at the end of the fastening straps
with the lock preset to open at 0-0. To reset
the combination to your own number, first
open the buckle, then use an object with a
small tip, such as a ball point pen, to press in
the reset button. Rotate the dial to your
desired number while keeping the reset
button depressed and release the button.
13
To Next Page
Loading...
