Software House RM2-4000-PI26 User Manual

Overview
2
Supported
Technologies and Card
Formats
The RM Multi-Technology reader can read three major card technologies – HID prox,
Indala prox, and 13.56 MHz smart card. Specific card formats supported include ISO
14443 A/B serial number, ISO 15693 serial number, iCLASS® serial number, MIFARE
encrypted sector, DESFire serial number, FIPS 201 PIV-II, and most 125 KHz formats
(HID, Indala 26-bit and CASI ProxLite).
NOTES  UL has not evaluated the ability to “flash” new card protocols or formats directly to
the reader.
 The RM Multi-Technology reader can be used to transition from a proximity system
to a more advanced smart card system gradually over time, or to maintain the
existing proximity card system while moving selected personnel to smart cards.
 UL has not evaluated Smart Card technology with this unit.
 UL has evaluated the Wiegand Proximity (26-bit only) card format for this unit.
Proximity
(125 KHz) Formats
Supported
NOTE
Not all features have been evaluated by UL.
TABLE 1. Part Numbers
Reader Model Part Number
With keypad; built-in RM-4 DS interface board RM2-4000-PI26
With keypad and LCD; built-in RM-4 DS interface board RM2L-4000-PI26
TABLE 2. Proximity (125 KHz) Formats Supported
Proximity (125 KHz) Formats
Supported
As Shipped: Default Mode
(On)
HID® 26 Bit Yes
HID® Corporate 1000 Yes
HID® 36 Bit Wiegand Yes
HID® 37 Bit Wiegand Yes
Other HID® Pass-through Formats Yes
Indala 26 Bit Yes
Deister Prox SmartFrame® Yes
(GE) Casi Rusco ProxLite Yes
Kantech ioProx No
DRAFT

Software House RM2-4000-PI26 Specifications

General

Brand	Software House
Model	RM2-4000-PI26
Category	Card Reader
Language	English