What to do if G Server Ping Failed on SolarEdge SE16K?
If your SolarEdge Inverter displays 'G Server Ping Failed', it indicates that the ping to google.com has failed. To resolve this, connect a laptop and check for internet connectivity.
What to do if SolarEdge Inverter string voltage is not 0V but lower than number of optimizers?
If the string voltage on your SolarEdge Inverter is not 0V but lower than the number of optimizers, it could be due to: * Power optimizers not connected in the string. Connect all power optimizers. * Modules not connected properly to power optimizer inputs (not applicable to smart modules). Connect the modules to the optimizer inputs. * String reverse polarity. Check the string polarity using a voltmeter and correct if needed.
How to fix SolarEdge Inverter no DHCP?
If your SolarEdge Inverter shows 'No DHCP', it could be due to an IP settings issue. Check both the router and the inverter configuration. You may need to configure a static IP address or set the inverter to DHCP. Consult your network IT professional for assistance.
What to do if SolarEdge SE16K Inverter string voltage is 0V?
If the string voltage on your SolarEdge Inverter is 0V, it is likely that one or more power optimizer outputs are disconnected. Ensure that all power optimizer outputs are properly connected.
How to fix SolarEdge Inverter LAN cable disconnected?
If your SolarEdge Inverter displays a 'LAN cable disconnected' error, it indicates a physical connection fault. Check the cable pin-out assignment and the cable connection itself.
General| Manufacturer | SolarEdge |
|---|---|
| Model | SE16K |
| Category | Inverter |
| AC Output Power | 16000 VA |
| Max Efficiency | 98.3% |
| Rated AC Power | 16000 W |
| CEC Efficiency | 97.5% |
| Topology | Transformerless |
| Maximum Efficiency | 98.3% |
| Number of MPP Trackers | 2 |
| Frequency | 50/60 Hz |
| Communication Interfaces | RS485, Ethernet |
| AC Voltage | 230/400 V |
| AC Output Voltage | 230/400 V |
| Operating Temperature Range | -25°C to 60°C |
Explains the meaning and use of safety symbols employed throughout the document.
Critical safety notes and warnings applicable to power optimizer installation.
Procedures for determining location, drilling, and securely mounting power optimizers.
Instructions for connecting PV module output to power optimizer input connectors.
How to connect multiple power optimizers in series to form strings.
Methods to verify correct wiring and polarity of power optimizer connections.
Detailed steps and considerations for mounting the inverter securely and with proper clearance.
Step-by-step guide for wiring the AC power supply to the inverter.
How to connect the DC strings from PV modules to the inverter's DC inputs.
Procedure for activating the inverter using the activation card and verifying status.
Process of logically assigning power optimizers to their respective inverters for operation.
How to check inverter status and confirm correct system activation.
Detailed steps for configuring the inverter settings via the internal LCD and buttons.
Overview of supported communication types like Ethernet, RS485, Wi-Fi, and Cellular.
Details on using RS485 for connecting multiple devices in a master-slave configuration.
How to set up Wi-Fi communication for connecting to the monitoring platform.
Using cellular connection for device communication to the monitoring platform.
Step-by-step guide for establishing an Ethernet connection to the monitoring platform.
How to physically connect inverters using RS485 for a bus configuration.
Steps to confirm successful establishment of communication with the monitoring server.
Solutions for common problems encountered with power optimizers.
Connecting the AC grid to the inverter via the DC Safety Unit.
How to connect DC strings to the DC input terminals of the DC Safety Unit.
Method for calculating and selecting the appropriate circuit breaker size based on inverter output.
To Next Page