SolarEdge SE7600H-US User Manual

The EV Charger Cable connects the EV plug to the inverter
The wall mounted EV Charger cable holder is used for hanging the EV Charger cable
and plug, protecting the plug from rain when not plugged into the vehicle (V2
holders), and provides strain relief for the inverter when the cable is pulled.
Figure 2: The EV Charger Cables (with holders)
Monitoring Platform
The monitoring platform enables monitoring the technical and financial performance of
one or more SolarEdge sites. It provides past and present information on the system
performance both at the system and module levels.
Supported ACGrids
The following figures illustrate grids that are supported by SolarEdge single phase
inverters. Refer to Setting Country and Language on page 44 ).
15
EV Charging Single Phase Inverter Guide MAN-01-00588-1.1

SolarEdge SE7600H-US Specifications

General

Model	SE7600H-US
AC Power Output	7600W
Max Efficiency	99%
Enclosure Rating	NEMA 4X
Nominal AC Voltage	240V
AC Voltage Range	211 - 264V
Max Output Current	32A
Max Inverter Efficiency	99%
Nighttime Power Consumption	<2.5W
MPPT Voltage Range	380 - 480V
Max Input Voltage	480V
Number of MPP Trackers	1
Cooling	Convection
Operating Temperature Range	-40°F to +140°F (-40°C to +60°C)
Communication Interfaces	RS485, Ethernet
Warranty	12 years