SolarEdge SE7600H-US User Manual

3. When the activation is complete, do one of the following:
Select Activate Another Inverter to continue activating additional inverters.
Select Start Commissioning for pairing and other system configuration. The
Commissioning screen is displayed. Refer to the next section for more
information.
Step 2: Commissioning and Configuring the
Installation
This section describes how to use the SetApp menus for commissioning and
configuring the inverter settings.
Menus may vary in your application depending on your system type.
To access the Commissioning screen:
Do one of the following:
During first time installation: Upon Activation completion, in the SetApp, tap Start
Commissioning. The main Commissioning menu screen is displayed.

Commissioning
Country and Language

›
Pairing 
›
Communication 
›
Device Manager 
›
Maintenance 
›
Information 
›
Status 
›

If the inverter has already been activated and commissioned:
Chapter 4: Activating, Commissioning and Configuring the System 43
EV Charging Single Phase Inverter Guide MAN-01-00588-1.1

SolarEdge SE7600H-US Specifications

General

Model	SE7600H-US
AC Power Output	7600W
Max Efficiency	99%
Enclosure Rating	NEMA 4X
Nominal AC Voltage	240V
AC Voltage Range	211 - 264V
Max Output Current	32A
Max Inverter Efficiency	99%
Nighttime Power Consumption	<2.5W
MPPT Voltage Range	380 - 480V
Max Input Voltage	480V
Number of MPP Trackers	1
Cooling	Convection
Operating Temperature Range	-40°F to +140°F (-40°C to +60°C)
Communication Interfaces	RS485, Ethernet
Warranty	12 years