What should I do if my SolaX Power X1-Hybrid-5.0-LV displays 'BuckBst startup failed'?
If your SolaX Power Inverter displays 'BuckBst startup failed', wait for a while to see if it returns to normal.
What should I do if my SolaX Power X1-Hybrid-5.0-LV Inverter displays 'DCBUS hardware overvoltage'?
If your SolaX Power Inverter displays 'DCBUS hardware overvoltage', wait for a while to see if it returns to normal.
What to do if SolaX Power Inverter shows '1.2 times overload'?
If your SolaX Power Inverter displays '1.2 times overload', turn off any high-power load connected to the inverter.
What should I do if my SolaX Power X1-Hybrid-5.0-LV Inverter displays 'Arc fault'?
If your SolaX Power Inverter is showing an 'Arc fault' message, wait for a while and observe if it returns to normal operation.
What to do if my SolaX Power X1-Hybrid-5.0-LV Inverter displays 'PV connection configuration error'?
If your SolaX Power Inverter shows a 'PV connection configuration error', turn off the PV, battery, and power grid. Then, restart the inverter and confirm whether the PV connection is correct.
What should I check if my SolaX Power Inverter displays 'Battery voltage is too high'?
If your SolaX Power Inverter displays 'Battery voltage is too high', check whether the battery output voltage is within the normal range.
What to do if SolaX Power Inverter displays 'Frequency configuration mismatch'?
If your SolaX Power Inverter shows a 'Frequency configuration mismatch', check whether the frequency is within the correct range.
What to do if SolaX Power X1-Hybrid-5.0-LV displays 'PV1 reverse connection'?
If your SolaX Power Inverter indicates 'PV1 reverse connection', turn off the PV, battery, and power grid, restart the inverter, and check the connection status of the positive and negative poles of PV1.
What to do if SolaX Power X1-Hybrid-5.0-LV Inverter displays 'PV2 reverse connection'?
If your SolaX Power Inverter indicates 'PV2 reverse connection', turn off the PV, battery, and power grid, restart the inverter, and check the connection status of the positive and negative poles of PV2.
How to troubleshoot 'Internal fan failed' on my SolaX Power X1-Hybrid-5.0-LV?
If the 'Internal fan failed' message appears on your SolaX Power Inverter, check whether there is any foreign matter inside the fan.
General| Max Efficiency | 97.6% |
|---|---|
| Battery Voltage | 48 V |
| Start Voltage | 120V |
| MPPT Voltage Range | 120 V - 550 V |
| Number of MPPTs | 2 |
| Nominal Output Voltage | 230 V |
| Rated AC Voltage | 230 V |
| AC Voltage Range | 180-280V |
| MPPT Range | 120 V - 550 V |
| Max. DC Input Current per MPPT | 11 A |
| Protection Degree | IP65 |
| Rated Power | 5000W |
| Battery Compatibility | Lithium-ion battery |
| Max. Discharging Power | 5000W |
| Max. DC Input Power | 6500W |
| Max. Output Power | 5000VA |
| AC Output Power | 5000W |
| Max. AC Output Power | 5000VA |
| AC Frequency | 50/60 Hz |
| Max. DC Input Power (Alternative) | 6500W |
| Operating Temperature Range | -25°C to 60°C |
| Cooling Method | Natural Convection |
| Communication | RS485, Ethernet, WiFi |
| Max. Charging Power | 5000W |
To Next Page
