To Next PageTo Next PageWhat to do if SolaX Power X3-25K-TL Inverter displays no output voltage on the remote monitor?
This is caused by the output switch tripping. Check if the DC switch is damaged, and if it isn't, switch it to the ON position.
What to do if SolaX Power X3-25K-TL Inverter displays PV Strings Reverse?
If your SolaX Power Inverter shows 'PV Strings Reverse', it means the PV string cables were connected incorrectly during installation. Check the PV string cables and reconnect them correctly if they are reversed.
What causes EEPROM Fault in SolaX Power Inverter?
The EEPROM Fault in your SolaX Power Inverter is caused by damaged EEPROM Component. Replace the monitoring board.
General| Model | X3-25K-TL |
|---|---|
| Type | String Inverter |
| Rated Output Power | 25000W |
| Max. DC Voltage | 1100V |
| Start Voltage | 200 V |
| MPPT Voltage Range | 200-1000V |
| Number of MPPTs | 2 |
| Max. AC Apparent Power | 27500VA |
| Rated AC Voltage | 400 V |
| THDi | <3% |
| AC Grid Frequency | 50/60 Hz |
| Max. Efficiency | 98.6% |
| Protection Degree | IP65 |
| Max. DC Power | 30000 W |
| Operating Temperature Range | -25°C to +60°C |
| Communication | RS485, WiFi |
| Humidity | 0-100% (non-condensing) |
Specifies the grid-tied PV string inverter models covered by the manual.
Identifies the target users for this user manual.
Indicates an imminently hazardous situation leading to serious injury or death.
Indicates a potentially hazardous situation leading to serious injury or death.
Indicates a potentially hazardous situation leading to moderate or minor injury.
Indicates a potentially hazardous situation leading to equipment failure or property damage.
Calls attention to important information, best practices, and tips.
Refers to additional documentation for further information.
Outlines safety requirements for trained technicians and users.
Details how to protect the inverter from damage and tampering.
Covers critical safety aspects related to inverter installation.
Covers safety precautions for electrical connections.
Details safety precautions during operation and commissioning.
Outlines safety precautions for inverter maintenance.
Provides advice on handling unforeseen issues and contacting the dealer.
Describes the inverter's function and available models.
Explains the grid-tied PV power systems application context.
Provides physical dimensions and overall layout of the inverter.
Shows detailed front, rear, and bottom views of the inverter.
Explains the different operating modes of the inverter.
Guides on inspecting the inverter package upon arrival.
Provides instructions for safely moving the inverter.
Explains how to identify the inverter using its nameplate and symbols.
Details general requirements for inverter installation.
Specifies criteria for selecting the inverter's installation location.
Details the process for mounting the inverter using a support structure.
Specifies correct and incorrect installation orientations.
Lists checks to perform after inverter installation.
Details how to connect the grounding cables to the inverter.
Step-by-step guide for connecting PGND cables.
Explains how to connect AC output cables to the inverter.
Step-by-step guide for connecting AC output cables.
Guides on connecting the PV strings to the inverter.
Details preparation for connecting PV strings, including route and cable specs.
Step-by-step guide for connecting PV strings.
Explains how to connect communication cables.
Describes available communication modes (Bluetooth, WiFi, GPRS, RS485).
Illustrates RS485 connection for single and multiple inverters.
Provides steps for connecting RS485 communication cables.
Guides on setting the RS485 communication address.
Lists items to check after inverter installation.
Step-by-step guide to power on the inverter.
Step-by-step guide to power off the inverter.
Explains the meaning of different LED indicator statuses.
Outlines regular maintenance tasks for the inverter.
Provides troubleshooting measures for common inverter faults.
Provides procedures for safely removing the inverter.
Details the terms and conditions of the product warranty.
Lists situations that void the warranty or liability.
