13
OPERATION OF
YOUR
ELLIPTICAL
GETTING FAMILIAR WITH THE CONTROL PANEL
E95 CONSOLE
POWER UP
When power is connected to the elliptical, the console will automatically power up. This model is
connected directly to 115 VAC and there is a power switch located where the line cord plugs
into the unit on the left side near the front.
**ATTENTION**
SLEEP MODE Your console comes in "Sleep mode" with different features by choice:
ON The unit goes energy-saving state after 15 minutes of inactivity.
OFF The console will stay lit while the power is on.
RETAIL The console will run the demo video after 3 minutes of inactivity.
On TFT displays, click “Sleep Mode” under Settings to switch among three features.
CHARGING
AREA
To Next Page
Loading...
