Need help?Do you have a question about the Solid State Logic SSL 2 and is the answer not in the manual?
General| Type | USB Audio Interface |
|---|---|
| A/D Resolution | 24-bit/192kHz |
| Preamps | 2 |
| Phantom Power | Yes |
| Headphones | 1 x 1/4" |
| Software | SSL Production Pack |
| Bit Depth | 24-bit |
| Headphone Output | 1 x 1/4" |
| MIDI I/O | No |
| Inputs | 2 x XLR/TRS Combo |
| USB | USB-C |
| Features | Legacy 4K mode |
| Sample Rate | 192kHz |
| Channels | 2 |
Description of the SSL 2 USB audio interface and its core function.
Information and recommendations for connecting the SSL 2 via USB.
Reminder to read important safety instructions before use.
Step-by-step instructions for installing SSL 2 on macOS.
Step-by-step instructions for installing SSL 2 on Windows.
Troubleshooting guide for resolving audio playback problems.
Description of controls for input gain, impedance, and metering.
How to adjust the blend between input and playback signals.
How to adjust the output volume for monitor speakers.
How to adjust the output volume for headphones.
Details of the microphone, line, and instrument input connectors.
Guidance on connecting and controlling monitor and headphone levels.
Steps for setting optimal input levels for dynamic microphones.
Steps for setting optimal input levels for condenser microphones.
Connecting and setting levels for guitars and basses via Hi-Z input.
Steps for monitoring incoming audio signals through monitors or headphones.
Configuring DAW tracks and arming them for recording.
Explanation of latency and using the Monitor Mix for low-latency monitoring.
General safety precautions for using the apparatus.
To Next Page
