Solid State Logic SSL 2 User Manual

Specications
20
SSL 2 User Guide
Specications
Audio Performance Specications
Unless specified otherwise, default test configuration:
Sample Rate: 48kHz, Bandwidth: 20 Hz to 20 kHz
Measurement device output impedance: 40 Ω (20 Ω unbalanced)
Measurement device input impedance: 200 kΩ (100 kΩ unbalanced)
Unless otherwise quoted all figures have a tolerance of ±0.5dB or 5%
Microphone Inputs
Frequency Response ± 0.1 dB
Dynamic Range (A-Weighted) 110.5 dB
THD+N (@ 1kHz) < 0.0015 % @ -8 dBFS, < 0.005 % @ -1 dBFS
EIN (A-Weighted, 150 Ω termination) -130.5 dBu
Maximum Input Level +5.5 dBu
Gain Range 62 dB
Input Impedance 1.2 kΩ
Line Inputs
Frequency Response ± 0.05 dB
Dynamic Range (A-Weighted) 110.5 dB
THD+N (@ 1kHz) < 0.0015 % @ -8 dBFS, < 0.005 % @ -1 dBFS
Maximum Input Level +24 dBu
Gain Range 62 dB
Input Impedance 10 kΩ
Instrument Inputs
Frequency Response ± 0.05 dB
Dynamic Range (A-Weighted) 110.5 dB
THD+N (@ 1kHz) < 0.0015 % @ -8 dBFS, < 0.005 % @ -1 dBFS
Maximum Input Level +15 dBu
Gain Range 62 dB
Input Impedance 1 MΩ
Monitor Outputs (Balanced)
Frequency Response ± 0.05 dB
Dynamic Range (A-Weighted) 112 dB
THD+N (@ 1kHz) < 0.0012% @ -8 dBFS, < 0.002 % @ -1 dBFS
Maximum Output Level +12.5 dBu
Output Impedance 1 Ω

Solid State Logic SSL 2 Specifications

General

Type	USB Audio Interface
A/D Resolution	24-bit/192kHz
Preamps	2
Phantom Power	Yes
Headphones	1 x 1/4"
Software	SSL Production Pack
Bit Depth	24-bit
Headphone Output	1 x 1/4"
MIDI I/O	No
Inputs	2 x XLR/TRS Combo
USB	USB-C
Features	Legacy 4K mode
Sample Rate	192kHz
Channels	2