Solid State Logic SSL 2 User Manual

Contents
SSL 2 User Guide
Table of Contents
Introduction to SSL 2 1
Overview 3
What is SSL 2? 3
Features 3
Get-Started 4
Unpacking 4
USB Cables & Power 4
USB Hubs 4
System Requirements 4
Registering Your SSL 2 5
What is the SSL Production Pack? 5
Quick-Start / Installation 6
Can't Hear Anything? 7
Selecting SSL 2 As Your DAW's Audio Device 8
Pro Tools | First Setup 8
Ableton Live Lite Setup 8
Front Panel Controls 9
Input Channels 9
Monitoring Section 10
Rear Panel Connections 11
How-To / Application Examples 12
Connections Overview 12
Connecting Your Monitors and Headphones 13
Selecting Your Input and Setting Levels 14
Dynamic Microphones 14
Condenser Microphones 14
Keyboards and Other Line-Level Sources 15
Electric Guitars and Basses (Hi-Impedance Sources) 15
Monitoring Your Inputs 16
When To Use The STEREO Switch 16
Setting Up Your DAW To Record 17
Low Latency - Using The Monitor Mix Control 17
What is Latency in relation to recording sound? 17
How To Use The Monitor Mix Control When Recording & Playing Back 17
Hearing Double? 18
DAW Buffer Size 18
Sample Rate 19
SSL USB Control Panel (Windows Only) 19
Safe Mode 19
Specications 20
Audio Performance Specifications 20
Digital Audio 21
Physical 21
Troubleshooting, FAQs, Important Safety Notices 22

Solid State Logic SSL 2 Specifications

General

Type	USB Audio Interface
A/D Resolution	24-bit/192kHz
Preamps	2
Phantom Power	Yes
Headphones	1 x 1/4"
Software	SSL Production Pack
Bit Depth	24-bit
Headphone Output	1 x 1/4"
MIDI I/O	No
Inputs	2 x XLR/TRS Combo
USB	USB-C
Features	Legacy 4K mode
Sample Rate	192kHz
Channels	2