Introduction
3
SSL 2 User Guide
Overview
What is SSL 2?
SSL 2 is a USB-powered audio interface that enables you to get studio-quality audio into and out of your computer with minimal
fuss and maximum creativity. On Mac, it's class-compliant - this means that you don't need to install any software audio drivers.
On PC, you'll need to install our SSL USB Audio ASIO/WDM driver, which you'll find on our website - see the Quick-Start section
of this guide for more information on getting up-and-running.
Once you've done this, you'll be ready to start connecting your microphones and musical instruments to the Combo XLR-Jack
inputs on the rear panel. The signals from these inputs will be sent into your favourite music creation software / DAW (Digital Audio
Workstation). The outputs from the tracks in your DAW session (or indeed your favourite media player) can be sent out of the
monitor and headphone outputs on the rear panel, so you can hear your creations in all their glory, with stunning clarity.
Features
• 2 x SSL-designed microphone preamps with unrivalled EIN performance and huge gain range for a USB-powered device
• Per channel Legacy 4K switches - analogue colour enhancement for any input source, inspired by the 4000-series console
• A professional-grade headphone output, with plenty of power
• 24-bit / 192 kHz AD/DA Converters - capture and hear all the detail of your creations
• Easy-to-use Monitor Mix Control for critical low-latency monitoring tasks
• 2 x balanced monitor outputs, with stunning dynamic range
• SSL Production Pack Software Bundle: including SSL Native Vocalstrip 2 and Drumstrip DAW plug-ins, plus much more!
• USB 2.0, bus-powered audio interface for Mac/PC - no power supply required
• K-Lock Slot for securing your SSL 2
SSL 2 vs SSL 2+
Which one is right for you, the SSL 2 or the SSL 2+? The table below will help you to compare and contrast the differences between
SSL 2 and SSL 2+. Both have 2 input channels for recording and balanced monitor outputs for connecting to your speakers. The
SSL 2+ gives you 'that little bit more', with an additonal professional high-powered headphone output, complete with independent
level control, making it perfect for when you are recording with another person. Furthermore, this additional headphone output can
be configured to provide a different headphone mix. SSL 2+ also features additional outputs for easy connection to DJ mixers and
finally, traditional MIDI input and MIDI outputs, for connecting to drum modules or keyboards.
Feature SSL 2 SSL 2+
Best Suited For Individuals Collaborators
Mic/Line/Instrument Inputs 2 2
Legacy 4K Switches Yes Yes
Balanced Stereo Monitor Outputs Yes Yes
Unbalanced Outputs - Yes
Headphone Outputs 1 2
Low- Latency Monitor Mix Control Yes Yes
MIDI I/O - Yes
USB Bus-Powered Yes Yes
SSL 2 vs SSL 2+ comparison at a glance
To Next Page
Loading...
Need help?
General