SOLINTEG INTEG M MHT-10K-40 - Back-Up and Off-Grid Output

18
User Manual
MHT-4~20K series


using the Back-Up function smoothly are as follows for your awareness.
①
Do not connect loads that are dependent on a stable energy supply for a reliable opera-
tion.
②
Do not connect the loads whose total capacity is greater than the maximum Back-Up
capacity.
③



④
-

O-gridOverloadingAbilityIllustration
 Mode    Duration

Balance Output Mode
   Continuous
2times 2times 2times 
    Continuous
The multiples above are calculated based on rated output power.
MHT-20K instantaneous max output power is 25kW.

be less than 1.1times.


※ 3.5Back-UpandO-GridOutput



surges.