SOLINTEG INTEG M MHT-10K-40 - Power Cable of the Battery Connection

54
User Manual
MHT-4~20K series
Cable requirements
Cable stripping length
Applicable
models
Outside diameter Conductor core section


（

）




（

）
 

Figure 5-37

poor contact between the terminal and the cable, please use the cable


CAUTION
①
Peel o the batte cable insulation sleeve for 10 mm.
※ 5.7PowerCableoftheBatteConnection


NOTE

①
Disconnect the AC breaker on the grid side.
②

③

④

Select an appropriate DC cable
②

