SOLINTEG INTEG M MHT-10K-40 - Commissioning; App Preparation; Inspection before Commissioning; Commissioning Procedure

57
User Manual
MHT-4~20K series
Commissioning
6
※ 6.1 App Preparation
①


②
Register an account on the Cloud monitoring App. If you have got the account and

※ 6.2 Inspection Before Commissioning

①
All equipment has been reliably installed.
②
DC switch and AC circuit breaker are in the "OFF" position.
③
The ground cable is properly and reliably connected.
④
The AC cable is properly and reliably connected.
⑤
The DC cable is properly and reliably connected.
⑥
The communication cable is properly and reliably connected.
⑦
The vacant terminals are sealed.
⑧


⑨
The AC circuit breaker is selected in accordance with the requirements of this manual
and local standards.
⑩
All warning signs & labels are intact and legible.
※ 6.3 Commissioning Procedure


①
Turn on the AC breaker.
②

equipped.
③

the customer.
④

the weather and grid meet requirements. The time for entering the operating mode may

⑤
