SOLIS Master 5000 User Manual

SOLIS MASTER 5000 User’s manual
Cold weather/Frost: The appliance
must be protected against frost and
should not be left overnight in a car
during winter.
3.1 The bean container is fixed with
two screws. Remove cover and fill con-
tainer with fresh coffee beans (approx.
300 g). At the same time, make sure
that the grinder adjustment knob (8a) is
set to position 8 (+/- 2). Properly close
the bean container with the cover.
3.2 Remove the water reservoir.
Remove the cover and fill reservoir
with cold water (max. 1,8 litres) and
place reservoir on machine. With slight
pressure make sure that the valve at
the bottom of the reservoir is properly
placed. Replace cover.
Caution: Use only fresh, cold water.
Never use carbonated water, milk or any
other liquid.
3.3 Pull the power cord from the back
of the machine to the desired length
(the rest of the power cord stays in the
cord container). Connect the plug to an
earthed socket.
3.4 Press the main ON/OFF switch.
The green indicator (17) will be lit and
the internal electronic system will auto-
matically perform a self-test. Sounds
occuring during this test are normal.
3.5 Priming the system
Place a suitable container underneath
the steam and hot water nozzle. Open
the steam/hot water knob until a steady
stream of water is dispensed. Close the
steam/hot water knob. The machine has
now been primed.
48
3.0 Starting up/First usage
Prior to starting the appliance, please carefully review the safety
instructions mentioned under Pt. 1.0.
The appliance should never be used without water or without coffee
beans.
Remove key for brewing unit and cleaning brush from the container
for waste coffee (7). Retain key and brush for future use.

SOLIS Master 5000 Specifications

General

Brand	SOLIS
Model	Master 5000
Category	Coffee Maker
Language	English