32
Reset
Configuration Data
Choose Enabled or Disabled
(default). Disabled means to retain
PnP configuration data in BIOS and
Enabled means to reset PnP
configuration data in BIOS.
ACPI I/O Device
Node
Choose Disabled (default) or
Enabled. Enabled is only used
when the ACPI device is installed
on to the system.
IRQ-x assigned to
DMA-x assigned to
Legacy ISA: Manually assigns
IRQ/DMA to device.
PCI/ISA PnP: BIOS assigns
IRQ/DMA to device automatically.
CPU To PCI Write
Buffer
Use the default setting.
PCI Dynamic
Bursting
Use the default setting.
PCI Master 0 WS
Write
Use the default setting.
Assign IRQ for
USB/VGA
Choose Enabled (default) or
Disabled.
Enabled: Add one IRQ to
USB/VGA controller.
Deisabled: Remove IRQ from
USB/VGA controller. The
system will have extra IRQ
for other devices but the
USB/VGA controller will
still not disabled (only IRQ
was removed.)
3. Press <ESC> and follow the screen instructions to save or
disregard your settings.
To Next Page
Loading...
