SOLTEK SL-67EV1 - Bios Features Setup

67EV1
17
3-2 BIOS FEATURES SETUP
• BIOS FEATURES SETUP allows you to improve your system performance
or set up sysem features according to your preference.
Run the BIOS FEATURES SETUP as following:
1. Choose “BIOS FEATURES SETUP” from the Main Menu and a screen
with a list of option will appear:
2. Use one of the arrow keys to move between options and modify the se-
lected options by using PgUp / PgDn / + / - keys. An explanation of the
<F> keys follows:
<F1>: “Help” gives oions available for each item.
<Shift> + <F2>: Change color.
<F5>: Get the previous values. These values are the values with which the
user started in the current session.
<F6>: Load all options with the BIOS default values.
<F7>: Load all options with the Setup default values.
Video BIOS Shadow  : Enabled
C8000-CBFFF Shadow : Disabled
CC000-CFFFF Shadow : Disabled
D0000-D3FFF Shadow : Disabled
D4000-D7FFF Shadow : Disabled 
D8000-DBFFF Shadow : Disabled 
DC000-DFFFF Shadow : Disabled
Virus Warning : Disabled
CPU Internal Cache : Enabled
External Cache : Enabled
CPU L2 Cache ECC Checking : Enabled
Quick Power On Self Test : Enabled
BOot Sequence : A, C, SCSI
Swap Floppy Drive : Disabled
Boot Up Floppy Seek : Disabled
Boot Up NumLock Status : On
IDE HDD Block Mode : Enabled
Gate A20 Option : Fast
Memory Parity / ECC Check : Disabled
Typematic Rate Setting : Disabled
Typematic Rate (Chars / Sec) : 6
Typematic Delay (Msec) : 250
Security Option : Setup
PCI / VGA Palette Snoop : Disabled
OS Select for DRAMs > 64MB : Non-OS/2
Report No FDD For WIN95 : No
Esc : Quit
F1 : Help
F5 : Old Value
F7 : Load Setup Defaults
PU/PD/+/- : Modify
(Shift) F2 : Color
: Select Item
ROM PCI/ISA BIOS
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.