SOLTEK SL-67EV1 - Page 25

67EV1
25
ACPI Function Enabled: Turn on ACPI function.
Disabled (default): Turn off ACPI function.
Power Management Choose Max. Saving, User Define (default), Disabled
or Min. Saving.
PM Control by APM When enabled, an Advanced Power Management
device will be activated to enhance the Max. Power
Saving mode and stop the CPU internal clock, If Ad-
vanced Power Management (APM) is installed on your
system, selecting Yes gives better power savings. If
the Max. Saving is not enabled, this will be present to
No.
Video Off After Choose NA, Suspend, Standby (default), or Doze.
MODEM Use IRQ This determines the IRQ in which the MODEM can
use.
The choice: 3, 4, 5, 7, 9, 10, 11, NA.
Soft-Off by PWR-BTTN Instant-Off (default): Turn off the system poer at once
after pushing the power button.
Delay 4 Sec: Turn off the system power 4 seconds
after pushing the power button. (to meet PC97/98
spec)
Doze Mode This mode sets the CPU speed down to 33MHz.
knalB+CNYSH/V
lacitrevehtffonrutotmetsysehtesuaclliwnoitcelessihT
ehtotsknalbetirwdnastropnoitazinorhcnyslatnozirohdna
.reffuboediv
neercSknalB .reffuboedivehtotsknalbsetirwylnonoitposihT
SMPD
rewoPyalpsiDehtstroppusrotinomruoyfinoitposihttceleS
oediVehtfodradnats)SMPD(gnilangiStnemeganaM
tnemeganamrewopoedivtcelesotsdradnatSscinortcelE
.seulav
Video Off Method This determines the manner in which the monitor is
blanked.