67EV1
27
The following is a list of IRQ’s (Interrupt ReQuests), which can be exempted
much as the COM ports and LPT ports above can. When an I/O device
wants to gain the attention of the operating system, it signals this by causing
an IRQ to occur. When the operating system is ready to respond to the
request, it interrupts itself and performs the service. When set On, activity
will neither prevent the system from going into a power management mode
nor awaken it.
IRQ 3 (COM 2)
IRQ 4 (COM 1)
IRQ 5 (LPT 2)
IRQ 6 (Floppy Disk)
IRQ 7 (LPT 1)
IRQ 8 (RTC Alarm)
3. Press <ESC> to return to the Main Menu when you finish setting up all
items.
To Next Page
Loading...
