67EV1
9
This jumper allows you to use the switch of ATX power supply to control ON/
OFF switch directly instead of using the power switch on the motherboard.
Clear CMOS Data
Retain Data (default)
JBAT1: CLEAR CMOS DATA
3
1
JBAT1
3
1
JBAT1
Normal (default)
JVGA1: VGA Card
JVGA1
For PCI VGA card
JVGA1
Connect the Wake On LAN signal from LAN card î
to JWOL1
JWOL1 : WAKE ON LAN (WOL) FUNCTION
JWOL1
This feature requires that Wake-On-LAN features are enabled and that your sys-
tem has an ATX power supply with at least 720mA / +5V standby power.
Enabled
Normal (default)
JP6: POWER LOST RESUME
3
1
JP6
3
1
JP6
Auto Detect 66MHz/100MHz/î
133MHz (default)
JP7: BUS CLOCK SELECT
1
3
JP7
133MHz
1
3
JP7
To Next Page
Loading...
