10
Edition: 2022-06 Original document - Mi-503 EN
without consulting the manufacturer! The manufacturer cannot be held liable for
any damages resulting from non-observance of the operating manual.
2.2.2 Liability for non-designated use.
Using the actuators for other purposes than those mentioned previously is
considered contrary to its designated use. For resulting damages of this, Somas
Instrument AB is not liable! The user take the risk.
2.3 Organizational measures
2.3.1 Availability of operating manual
The operating manual has to be stored and be readily available!
2.3.2 Additional regulations
In addition to the operating manual, it have to be observed all other generally
applicable legal and other mandatory regulations relevant to accident prevention
and environmental protection! Direct the personnel to comply with them!
2.3.3 Checks
Periodically check that the personnel carry out the work in compliance with the
operating manual and that they pay attention to risks and safety factors.
2.3.4 Protective equipment
Use when necessary protective equipment.
2.3.5 Rebuilds or modifications at the actuator
Do not make any rebuilds or modifications at the actuator yourself, which can
affect the security of the actuator.
2.3.6 Replacing damaged parts
Actuator parts that are not in perfect condition must be replaced immediately
with original spare parts! Use only original spare and wear parts from Somas
Instrument AB.
On unauthorized parts is not guarantee that they have been designed and
manufactured according to the application.
2.4 Selection and qualification of personnel
Operation, maintenance and repairing works require special knowledge and
may only be carried out by trained technical specialists or qualified personnel
authorized by the user.
To Next Page
Loading...