16
STEP
5
FINISHING UP
5a.
Follow the instructions included with the battery pack or battery tube. Prepare and secure the battery tube or pack
to the window frame or wall using the included clips and hardware. Then attach the battery connector to the motor connector.
NOTE: Make sure that the battery pack has a full charge (rechargeable battery pack) or use new AA batteries (battery tube).
Li-Ion Rechargeable Battery Pack 12V Battery Tube (8AA Lithium)
IMPORTANT Do not disconnect the battery or power supply while the motor is operating. The motor’s power-supply
cable cannot be removed or replaced. If it is damaged, please contact Somfy.
5b. Rehang the blind by sliding it back into the open brackets, then snap both brackets closed. Replace any valance or decorative
covering, if used.
NOTE: Lower the blind manually before programming the remote (Step 6).
Visit somfysystems.com/clever for additional support with power & control.
To Next Page
Loading...
