Select the channel on which you wish to carry out the
register test
Press the PROG and SEL buttons simultaneously for 0.5
of a second.
The registered product then performs a movement.
To stop this movement, press the PROG and SEL buttons
again briefly.
To make the movement in the reverse direction, press the
PROG and SEL buttons a third time, etc.
=> see process described opposite
To test that products have been correctly registered in your
Connexoon unit:
A. R
EGISTER
RTS
products in the Connexoon unit (prog-prog)
PROG + SEL
STOP
PROG + SEL
PROG + SEL
PROG + SEL
STOP
< 5s
PROG + SELECT
< 5s
@6
SEL
@5
SEL
@4
SEL
@3
SEL
SEL
@2
SEL
@1
< 5s
To Next Page
Loading...
