SOMFY LS40 - Integration to BMS: Altus Motors; Option 1: Single Channel Transmitter

Motorisation of Window Coverings
using Somfy Motors
Integration to BMS using Altus motors
Option 1
Busline Transmitter (single channel)
• Requires 240V power supply
•
Converts dry contact closure to Radio frequency
• Dry contact impulse switching (impulse contact closure of 5 seconds
minimum)
• Contact between common and up or common and down to activate motor
•
Simultaneous contact between a common up and down to create a stop
• One transmitter for each command required
• Transmission range 30m in open space
• Dimensions: 80 (h) x 80 (w) x 18 (d) (surface mount)
• Dimensions: 80 (h) x 80 (w) x 45 (d) (flush mount)
IMPORTANT: Do not activate more than 1 transmitter at a time. Activation of
multiple transmitters simultaneously will result in radio interference and motors will
not operate.