Set&Go io
1
EN
1. INTRODUCTION
a) Set&Go io 1
b) USB cable 1
c) Adhesive support 1
4. CONTENTS
2.1. Safety and liability
Before installing and using this product, please read this guide carefully.
This Somfy product must be installed by a home motorisation and automation professional for
whom this guide is intended. Moreover, installers must comply with the standards and legislation in
force in the country where the product is installed, and inform their customers of the operating and
maintenance conditions for the product.
is prohibited. This invalidates the warranty and discharges Somfy of all liability, as does any failure to
comply with the instructions given herein.
devices and accessories (www.somfypro.com/Set-Go).
1) Avoid impacts!
Do not drop!
Do not spill liquid on the product or immerse it in liquid.
Do not use abrasive products or solvents to clean the
product. Its surface can be cleaned with a soft, damp cloth.
1
2. SAFETY
Set&Go io is an io-homecontrol
®
installation tool that can be used to set Somfy motors and associate
control points with io-homecontrol
®
motors and receivers. It is also used to manage the installation's
®
USB unit and a PC
application.
io-homecontrol
®
provides advanced and secure radio technology that is easy to install.
io-homecontrol
®
labelled products communicate with each other, improving comfort,
security and energy savings.
www.io-homecontrol.com
a
b
c
3. REQUIREMENTS
1) The installation must include devices that incorporate io-homecontrol® technology (roller shutters,
garage doors, skylights, blinds, lights, etc.).
Good battery life
To Next Page
Loading...
