7.8.3 SEATS AND SAFETY HARNESSES
Seats are constructed in aluminium and covered with cushions.
Each seat can be adjusted backwards and forwards for comfort with forward
movement, which is slightly raising the seat height, in order to ensure that the
rudder pedals can easily be reached by all pilots – see warning and note on next
page.
The longitudinal adjustment lever is located between the pilot legs as indicated
in the circles below. To adjust seat:
1. Pull lever left
2. Adjust seat as required
3. Release lever
4. Move seat forward and backward until mechanism is locked. This is confirmed
by the lever going back to its full right position
5. Check seat secure by trying to lift it in an upward / forward combined force on
backrest
To Next Page
