15
Specications
SONAMP DSP 2-750 MKII
NumberofChannels 2 (1 stereo pair)
Power Output - 8 ohms (Stereo) 500 Watts RMS per channel (all channels driven)
Power Output - 4 ohms (Stereo) 750 Watts RMS per channel (all channels driven)
Power Output - 8 ohms (Bridged) 2000 Watts
FrequencyResponse 5Hz–50kHz,bandwidthlimited
Total Harmonic Distortion 0.4% (1kHz, 8 ohms) 0.3% (1kHz, 4 ohms)
SignaltoNoiseRatio -100dB(20Hz-20kHz)
Input Gain 29dB
Input Sensitivity 100mV for 1 Watt Output @8 ohms
2200mV for 500 Watts Output @8 ohms
Input Impedance 20k ohms
Loop Output Impedance 600 ohms
Maximum Source Input Voltage 2.9V VAC RMS
CommunicationProtocol TCP/IP(RJ-4510/100BaseT)
Power Consumption 120V AC
@8 ohms (sinewave, full power) 1280 Watts (all channels driven)
@4 ohms (sinewave, full power) 1780 Watts (all channels driven)
@8ohms(sinewave,1/8power) 212Watts(allchannelsdriven)
@4ohms(sinewave,1/8power) 270Watts(allchannelsdriven)
@Idle 41 Watts
@IP or IR standby 1.6 Watts
@Standby 0.4 Watts
Power Consumption 220V AC
@8 ohms (sinewave, full power) 1220 Watts (all channels driven)
@4 ohms (sinewave, full power) 1720 Watts (all channels driven)
@8ohms(sinewave,1/8power) 200Watts(allchannelsdriven)
@4ohms(sinewave,1/8power) 257Watts(allchannelsdriven)
@Idle 38 Watts
@IP or IR standby 1.3 Watts
@Standby 0.4 Watts
Heat Output
@8 ohms (sinewave, full power) 683 BTU (all channels driven)
@4 ohms (sinewave, full power) 1195 BTU (all channels driven)
@8ohms(sinewave,1/8power) 260BTU(allchannelsdriven)
@4ohms(sinewave,1/8power) 340BTU(allchannelsdriven)
AC Voltage 100-120V@60Hz, 220-240V@50Hz
AC Fuse 15A (T15AL ~ 250V)
Rack Space Requirement 2U
Dimensionsw/Feet(WxHxD) 171/4”x37/8”x1613/16”(438mmx98mmx427mm)
Dimensionsw/RackEarsw/oFeet(WxHxD) 19”x31/2”x1613/16”(482mmx88mmx427mm)
Shipping Weight 23.3 lbs (10.6kg)
CADFilesavailablefordownloadatwww.sonance.com/electronics/ampliers/dsp