Get Started 15
Charging the Battery
The battery provided with your mobile phone does not come fully charged. We recommend that
you charge the phone for five hours before you use it for the first time.
Note: With a fully charged battery, the phone can remain in standby mode for up to 800 hours.
If the battery is completely out of charge, the charging icon appears only after several minutes
when the charger is connected.
Warning: Do not use an incorrect battery type as it might cause explosion.
Complete the following steps to charge the phone battery.
1. Plug the charger into a power outlet.
2. The charger port is located on the left side of the phone. To access the charger port, lift
the cover with the USB sign. Insert the 3.5mm jack/connector of the USB cable into the
port and insert the other end of the USB cable into the charger.
Alternatively, you can charge the phone with your PC. Insert the 3.5mm jack/connector
of the USB cable into the charger port of the phone and insert the other end of the cable
into a USB port on your PC.
3. If the battery is being charged when the phone is switched off, only the battery icon is
displayed (as shown in the below figure).
If the battery is being charged while the phone is switched on, you will notice that the
bars in the battery charge icon (visible on the home screen) show movement indicating
that the battery is being charged. After the phone is fully charged, the battery bars on the
display stop scrolling. At this point, you can disconnect the phone from the charger.