Sonim XP STRIKE - Network Service Settings; Restore Factory Settings

Settings 50
Options
Description
Sprint Only
Can receive calls and messages only in your home network (Sprint
network).
Automatic
Can receive calls and messages in both home and roaming networks.
The network is set automatically.
Follow the instructions below to set a different ring tone for roaming calls.
► Select Menu (left selection key) > Settings > Network > Roam call ring. tone and
selecting one of the following options:
 On to turn roam call tone on.
 Off to turn roam call tone off.
 Ringing tone to select a ringtone to use.
Network Service Settings
This function enables you to forward your incoming calls to a number in the Contacts list or a
new number, provided your network operator supports this service.
Follow the instructions below to assign a number to forward incoming calls:
1. Select Menu (left selection key) > Settings > Network serv. > Call forwarding > All
voice calls > Activate.
2. Enter the number and select OK (menu key).
– or –
Select Find (menu key) to select a contact from your Contacts list.
Restore Factory Settings
Follow the instructions below to restore your phone’s settings to their defaults as well as erase
your personal data.
Note: The default lock code is the last four digits of your phone number.
Warning: If you select Restore all, you cannot retrieve the personal data and the phone will
restart automatically.
1. Select Menu (left selection key) > Settings > Restore factory settings.