Sonim XP STRIKE - Group Connect and TeamDC

Sprint Direct Connect 37
5. Press the Red button (End call button) to disconnect.
Note: All Direct Connect calls end automatically if there is no activity on the call for several
seconds.
Make a Direct Connect Call from Contacts
Follow the instructions below to make Direct Connect calls to the Direct Connect numbers
stored in your Contacts.
1. From standby mode, select Menu (left selection key) > Contacts > All Contacts and
highlight the Direct Connect contact.
2. To call the number, press and release the DC button.
3. Continue the Direct Connect call as described in Make a Direct Connect Call by Entering
a Number.
4. Press the Red button (End call button) to disconnect.
Make a Direct Connect Call from History
Follow the instructions below to make Direct Connect calls to the Direct Connect numbers
present in your call history.
1. Select Menu (left selection key) > History > select the call type and highlight the Direct
Connect number.
– or –
From standby mode, press the DC button to display your Direct Connect (including Call
Alert and Invite) call history.
2. Highlight the number and press and release the DC button.
3. Continue the Direct Connect call as described in Make a Direct Connect Call by Entering
a Number.
4. Press the Red button (End call button) to disconnect.
Note: To redial your most recent Direct Connect call, press and hold the DC button.
Direct Connect History Entries
The following icons indicate the different types of Direct Connect calls in the call history.
Icon
Description
Missed DC call