What to do if my Sonoro Stereo System has no sound?
If your Sonoro Stereo System has no sound, make sure the volume isn't set to the minimum. Also, ensure that the sound isn't muted. Unplug any headphones that may be connected. Finally, verify that you've selected the correct playback mode.
Why won't my Sonoro SO-310 CD playback start?
If your Sonoro Stereo System CD playback won't start, the CD format may not be compatible. Try inserting a different CD. The CD might also be dirty, so try cleaning it. The CD could be damaged, so try a different CD. Also, ensure the CD is inserted the right way up in the CD slot.
Safety instructions for device operation.
Defines the proper and intended uses of the device.
Handling and disposal of batteries.
Instructions for dealing with device defects and repairs.
Safety information related to the device's laser classification.
General operational precautions for the device.
Instructions for safely unpacking the device and checking contents.
Instructions for connecting the device to power and antenna.
Steps for inserting the backup battery for clock functionality.
Steps for inserting the battery into the remote control.
Initial device setup and display information upon first power-on.
Accessing and configuring time, date, language, and other settings.
Options available in the standby menu for configuration.
General| Brand | Sonoro |
|---|---|
| Model | SO-310 |
| Category | Stereo System |
| Language | English |
To Next Page
