Sonos One - Page 21

Sonos One Mount
Important: This mount is intended for use only with Sonos One, One SL, and Play:1.
What's in the box?
Note: Sonos speakers sold separately.
What you’ll need
Wall mount Pre-drill Use wall anchors Use screws
Wood stud 1/8” / 3mm bit No Yes
Drywall (no stud) 5/16” / 8mm bit Yes Yes
The easy-to-install mount for Sonos One, One SL and Play:1.
Holds speaker normally, upside-down, or even horizontally.
Speaker can pivot up to 45 degrees.
Allows access to ports, buttons, and touch controls.
Cleanly routes your speaker’s cables.
Mount
Wall bracket
Top cap
Mounting kit
Pencil
Level
Phillips-head screwdriver
Power drill (if needed for installation location)