Sony BDP-S1700 - Step 2: Preparing for Network Connection; Step 3: Easy Setup

17
BDP-S3700/BDP-BX370/BDP-S1700
4-579-663-13(1)
master page=right
E:\SONY
DVD\SD160018\4579663131_US\030STU.fm
Getting Started
Step 2: Preparing for
Network Connection
If you are not going to connect the player
to a network, proceed to “Step 3: Easy
Setup” (page 17).
Use a LAN cable to connect to the LAN
(100) terminal on the player.
z
The use of a shielded and straight interface
cable (LAN cable) is recommended.
Use the wireless LAN that is built into
the player.
Step 3: Easy Setup
1 Insert two Size AAA (R03)
batteries by matching the 3 and
# ends on the batteries to the
markings inside the battery
compartment of the remote.
2 Connect the supplied AC adaptor
in the numeric order shown
below. When removing them, do
so in reverse order.
Wired Setup
Wireless Setup (BDP-S3700/
BX370 only)
ADSL modem/
Cable modem
Broadband
router
LAN cable
(not supplied)
Internet
Wireless LAN
router
ADSL modem/
Cable modem
Internet
LAN cable (not supplied)
When turned on for the first time
Wait for a short while before the
player turns on and starts [Easy
Initial Settings].
to AC outlet
1 to DC IN
12 V
2
AC adaptor (supplied)