Sony BDP-S1700 - Network Settings]

29
BDP-S3700/BDP-BX370/BDP-S1700
4-579-663-13(1)
master page=right
E:\SONY
DVD\SD160018\4579663131_US\060ADJ.fm
Settings and Adjustments
x [Quick Start Mode]
[On]: Shortens the startup time when
turning on the player.
[Off]
: Reduces standby power
consumption.
x [Auto Display]
[On]: Automatically displays
information on the screen when
changing the viewing titles, picture
modes, audio signals, etc.
[Off]: Displays information only when
you press DISPLAY.
x [Software Update Notification]
[On]: Sets the player to inform you of
newer software version information
(page 24).
[Off]: Turns off the function.
x [Gracenote Settings]
[Auto]: Automatically downloads disc
information when disc playback stops.
Connect to the network for
downloading.
[Manual]
: Downloads the disc
information when [Video Search] or
[Music Search] is selected.
x [Device Name] (BDP-S3700/BX370
only)
Displays the player’s name. The player’s
name can be changed.
x [System Information]
Displays the player’s software version
information and the MAC address.
x [Software License Information]
Displays information about the Software
License.
[Network Settings]
x [Internet Settings]
Connect the player to the network
beforehand. For details, see “Step 2:
Preparing for Network Connection”
(page 17).
[Wired Setup] (BDP-S3700/BX370
only): Select this when you connect to a
broadband router using a LAN cable.
[Wireless Setup]
(BDP-S3700/BX370
only): Select this when you use the
wireless LAN that is built into the player
for wireless network connection.
z
For further details, visit the following website
and check the FAQ contents:
http://www.sony.com/bluraysupport/
x [Network Connection Status]
Displays the current network status.
x [Network Connection
Diagnostics]
Checks for the proper network
connection by running the network
diagnostics.
x [Screen mirroring RF Setting]
(BDP-S3700/BX370 only)
[Auto]: Sets the RF (Radio Frequency)
channel band automatically for Screen
mirroring connection.
[CH 1]/[CH 6]/[CH 11]: Sets CH 1/
CH 6/CH 11 as priority.
x [Connection Server Settings]
(BDP-S3700/BX370 only)
Sets whether or not to display the
connected server.