Sony BDP - S1E - Connecting to AV Amplifiers

14
Connecting to an AV amplifier
(receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
If your AV amplifier (receiver) only has L and R audio input
jacks, use . If your amplifier (receiver) has a digital input
jack, use .
You can enjoy surround effects only when playing Dolby
Surround audio or multi-channel audio (Dolby Digital or DTS)
discs.
Connecting to an AV amplifier
(receiver) with 5.1ch input jacks and 6
speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
.
AC IN
VIDEO OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
5.1CH OUTPUT
AUDI O
OUT
VIDEO
Y
L
R
L
R
WOOFER
COAXIAL OPTICAL
FRONT REAR CENTER
P B /C B
P R /C R
S VIDEO
HDMI
OUT
C-2 C-1
AUDIO
OUT
L
R
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
Coaxial digital cord
(not supplied)
to DIGITAL OUT
(COAXIAL or OPTICAL)
or
to AUDIO OUT
L/R
(red)(white)
Stereo audio
cord (supplied)
(red)(white)
to audio input
to coaxial or optical
digital input
Optical digital cord
(not supplied)
[Speakers] [Speakers]
Rear (L) Rear (R)
Subwoofer
Centre
Rear (mono)
Front (L)
Front (R)
AV Amplifier
(receiver) with a
decoder
: Signal flow
Blu-ray Disc player
z
Hint
For correct speaker location, see the operating instructions of the
connected components.
Note
When connecting 6 speakers, you do not need the “Rear (mono)” speaker
above.
C
C-1
C-2
AC IN
VIDEO OUT
COMPONENT
VIDEO OUT
DIGITAL OUT
PCM/DTS/DOLBY DIGITAL
5.1CH OUTPUT
AUDI O
OUT
VIDEO
Y
L
R
L
R
WOOFER
COAXIAL OPTICAL
FRONT REAR CENTER
P B /C B
P R /C R
S VIDEO
HDMI
OUT
D-1
5.1CH OUTPUT
L
R
WOOFER
FRONT REAR CENTER
[Speakers] [Speakers]
Rear (L)
Rear (R)
Subwoofer Front (L)
Front (R)
Centre
AV amplifier
(receiver) with
5.1ch inputs
: Signal flow
to 5.1CH
OUTPUT
Blu-ray Disc player
to audio input
Stereo audio
cord (one is
supplied)
Monaural
audio cord
(not supplied)
z
Hint
For correct speaker location, see the operating instructions of the
connected components.
D-1
D-1