Sony CCP-8000 - Maintenance and Memory Stick Usage; Menu Display Cleaning; Memory Stick Media Guide

1-15
CCP-8000 IM
1-6. Installing the Menu Panel
1-6. Installing Menu Panel
The menu panel MKS-8011 can be installed to the monitor
arm compliant with VESA Standard using the adapter
supplied with CCP-8000. See the dimensions for installa-
tion below.
Adapter installation dimensions
(compliant with VESA Standard)
The following parts supplied with CCP-8000 are required
to install the menu panel.
n
Use the specified accessories when installing the menu
panel.
. Adapter
. 50-pin cable
. Screws B3 x 5 (4)
. Screws B4 x 8 (4)
Installation
n
Connect the attached 50-pin cable to the menu panel, and
then perform the following steps.
1. Install the adapter to the menu panel with the attached
four screws (B3 x 5).
2. Install a commercially available monitor arm to the
adapter with the attached four screws (B4 x 8).
n
For installation of monitor arm, refer to its operation
manual.
100 mm
75 mm
4-M4
4-M4
100 mm
75 mm
B3 x 5
B3 x 5
Adapter
Menu panel
50-pin cable
100 mm
75 mm
75 mm
Adapter
Monitor arm
B4 x 8
B4 x 8
100 mm