2-3
CCP-8000 IM
2-4. Installing the Operation Modules
2-4-1. Installing Modules
c
Be sure to turn off the POWER switch before starting to
install modules.
1. Installation to the main panel
Applicable modules
. MKS-8013 32 AUX Bus Module
. MKS-8013B 32 AUX Bus Module
. MKS-8014 24 AUX Bus Module
. MKS-8014B 24 AUX Bus Module
. MKS-8015 16 AUX Bus Module
. MKS-8015B 16 AUX Bus Module
. MKS-8017 32 XPT Module
. MKS-8017B 32 XPT Module
. MKS-8018 24 XPT Module
. MKS-8018B 24 XPT Module
. MKS-8019 16 XPT Module
. MKS-8019B 16 XPT Module
. MKS-8020 Standard Transition Module
. MKS-8021 Simple Transition Right Module
. MKS-8022 Simple Transition Left Module
. MKS-8023 Compact Key Transition Module
. MKS-8024 Flexipad Module
. MKS-8025 Memory Card/USB Module
*1
(Refer to page 2-4.)
. MKS-8025MS Memory Stick/USB Module
*1
(Refer to page 2-4.)
. MKS-8026 10 Key Pad Module
. MKS-8027 Compact Transition Right Module
. MKS-8028 Compact Transition Left Module
. MKS-8030 Key Frame Module
. MKS-8031JS Joystick Module
. MKS-8031TB
Track Ball Module
*2
(Refer to page 2-4.)
. MKS-8032 DSK Fader Module
. MKS-8033 Utility/Shotbox Module
. MKS-8034DK DSK/FTB Module
. MKS-8034FB FTB Module
. MKS-8035 Key Control Module
Installation
1. Remove the module covers on both sides of the
operation module that you want to remove or of the
blank panel.
2. Loosen the four screws (with drop-safe) fixing the
operation module or the blank panel.
3. Hold the two screws on the sides of the operation
module or the blank panel of both sides. Then remove
the operation module or the blank panel.
(When you want to install the MKS-8025/8025MS, go
to *1 on next page.)
4. Install the desired operation module to the position
where the operation module is removed in step 3.
Tighten the four screws (with drop-safe) and fix it.
5. Install the module cover.
(when you want to install the MKS-8031TB, go to *2
on next page.)
Module covers
Operation module
Screws
(with drop-safe)
Screws
(with
drop-safe)
2-4. Installing the Operation Modules
To Next Page
Loading...
