Sony CCP-8000 - Installing the HK-PSU02; Installing the HK-PSU03

2-2
CCP-8000 IM
2-2. Installing the HK-PSU02
c
Before installing the backup power supply unit HK-PSU02
in MKS-8010A, set the POWER switch of HK-PSU02 to
the “O” position (OFF).
Installation
1. Turn off the main power of the MKS-8010A and
disconnect the AC power cord from the outlet.
2. Remove the front panel. (Refer to Section 2-1.)
3. Remove the two screws that fix the blank panel to the
HK-PSU02 installation location, and remove the blank
panel.
n
Store the removed blank panel in a safe place.
4. Insert the HK-PSU02 securely into the deep end.
5. Secure the HK-PSU02 with the two screws.
6. Reinstall the front panel.
Handle
HK-PSU02
Indicator
PSW3 x 6
Blank panel
PSW3 x 6
PSW3 x 6
2-2. Installing the HK-PSU02
2-3. Installing the HK-PSU03
2-3. Installing the HK-PSU03
c
Before installing the backup power supply unit HK-PSU03
in MKS-8010, set the POWER switch of HK-PSU03 to the
“O” position (OFF).
Installation
1. Turn off the main power of the MKS-8010 and
disconnect the AC power cord from the outlet.
2. Remove the front panel. (Refer to Section 2-1.)
3. Remove the two screws that fix the blank panel to the
HK-PSU03 installation location, and remove the blank
panel.
n
Store the removed blank panel in a safe place.
4. Insert the HK-PSU03 securely into the deep end.
5. Secure the HK-PSU03 with the two screws.
6. Reinstall the front panel.
Blank panel
B3 x 5
B3 x 5
HK-PSU03