Sony CCP-8000 - Main Panel;Aux Panel; Periodic Inspection and Maintenance; Periodic Inspection

3-2
CCP-8000 IM
3-1. Troubleshooting
3-2. Periodic Inspection and Maintenance
3-1-3. Main Panel/AUX Panel
LEDs and other indicators do not light.
YES
YES
NO
NO
NO
YES
Flow 3
Set it to ON.
Connect the D-sub
50-pin cable.
Connect the LAN
cable.
LEDs and other indicators do not light.
Is the POWER switch of the
MKS-8010/8010A turned ON?
In case of
main panel
Is the connection cable connected
correctly? (Is the connector (SCU) of
the MKS-8011 connected to the
connector (MENU PANEL) of the
MKS-8010/8010A?)
In case of
AUX panel
Is the connection cable connected
correctly? (Is the connector (SCU) of
the AUX panel connected to the
connector (EXT PANEL 1 to 3) of
the MKS-8010/8010A?)
Is the CTRL LAN cable connected
to the MKS-8010/8010A (CTRL)?
The Main Panel or AUX panel or the
MKS-8010/8010A is probably defective.
3-2. Periodic Inspection and Maintenance
3-2-1. Periodic Inspection
The following parts require periodic maintenance.
Refer to the period indicated in the following list for maintenance.
Part Location Maintenance Suggested period
Fan Side on the rear of the MKS-8010/8010A Cleaning Once in a month
Track ball MKS-8031TB Cleaning Once in a month
Filter Front panel on the MKS-8010/8010A Cleaning Once in two months
Backup capacitor The menu CPU assembly in the MKS-8010 Replacement Once in five years
The MPU-302B board (BT1301) in the MKS-8010A Replacement Once in five years