Sony CDP-C265 - SECTION 4. DIAGRAMS; 4-1. BLOCK DIAGRAM

10
Playing CDs
Shuffle Play on one disc
You can play all tracks on the specific disc in a random
order.
1 Press SHUFFLE repeatedly until “1 DISC” appears
in the display.
2 Press DISC 1-5 to start 1 DISC shuffle play on the
selected disc.
The J, indication appears while the player is
“shuffling” the tracks.
To cancel shuffle play
Press CONTINUE.
Key You can start shuffle play while playing
Press SHUFFLE, and shuffle play starts from the current
track.
an TT]
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks on the discs
and create your own program. The program can
contain up to 32 tracks.
PROGRAM
DISC 1-5
Cc @ CHECK
Number buttons >10 CLEAR
1° Press PROGRAM.
“PROGRAM” appears in the display.
If a program is already stored, the last step of the
program appears in the display. When you want to
erase the whole program, hold down CLEAR until
“ALL CLr” appears in the display (see page 11).
2 Press DISC 1 —5 to select the disc.
ra ee
AR Yee) eee
“AL” in the display stands for “all” tracks.
When you want to program the whole disc as one
step, skip Step 3 and go to Step 4.
3 Press the number buttons of the tracks you want to
program in the order you want.
To program the track numbered over 10, use the
>10 button (see page 8).
Last programmed
track
Playing order
After
one
second
Programmed
tracks
Total playing time
If you've made a mistake
Press CLEAR, then press the correct number button.
4 To program other discs or tracks, do the following:
To program Repeat Step(s)
Other discs 2
Other tracks onthesamedisc 3
Other tracks on other discs 2 and 3
5 Press [> to start program play.
To cancel program play
Press CONTINUE.
“C* You can create your program while checking the disc
labels
While the disc tray is open, follow Steps 1 to 5 with
pressing DISC SKIP to check the disc labels. If you close
the disc tray before Step 5, the total playing time appears
in the display after a while.
Note that, if the programmed track number isn’t found
on the disc, that step is automatically erased.
Key The program remains even after the program play
ends
When you press [, you can play the same program
again.